Smarty SSR

How it works?

The SSR provides just one base performance software that takes care of all the limiting factors like the speed / RPM / Torque & boost limiters. Then you will need to fine tune the injection duration, injection timing & rail pressure to the truck’s needs. The three most critical performance parameters in a Diesel engine!In order to allow the complete customization of the performance software to the particular engine’s needs, the SSR provides 50 levels each for the following parameters:

• Low Load injection Timing ( LLT )
• High Load injection Timing ( HLT )
• Low Load injection Duration ( LLD )
• High Load injection duration ( HLD )
• Low Load Rail Pressure ( LLRP )
• High Load Rail Pressure ( HLRP )

All you need to do is to select the tuning parameters that match your truck best, voilà.

Power on Demand

100 power levels selectable in just one second during the driving!
It’s easy: just type the preferred power level directly on Smarty keyboard, from 00 to 99. That’s all!
For security reason, the truck waits that the throttle is released before applying the new power level.

No trace is left in the ECM!

We herby CLAIM that SmartyCR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled.
No matter what the competition claims , in one way or another they’re ALL detectable.
Smarty is NOT!
Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty can not restore a key on counter that another downloader has erased. Smarty can not fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed your ECM, Smarty can not fix it, the other guy HAS to.

ABS / Speedo recalibration

The tire height can be adjusted up to 44″ in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader

The name says it all.
You can read and erase codes. Codes are displayed also in plain English. That’s old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. (Smarty does erase ABS codes too but does not display them).

ECM update speed

Faster than anything else on the market! Again we’ve done our homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it’s own.