|
Fast guide to
Smarty's software levels
The horsepower settings,
except #0, all other softwares have a modified "Torque
management" (TQM). The throttle response is greatly
improved but is set to a safe limit. With "Safe" I mean
safe for your tranny and rest of the driveline.
- SW # 0 : Half power
- SW # 1 : 30 hp increase, with added timing
- SW # 2 : 60 hp increase, no added timing ***
- SW # 3 : 60 hp increase, with added timing
- SW # 4 : 90 hp increase, no added timing ***
- SW # 5 : 90 hp increase, with added timing
- SW # 6 : 130 hp increase, no added timing ***
- SW # 7 : 130 hp increase, with added timing
- SW # 8 : 170 hp increase, no added timing *** °°°
- SW # 9 : 170 hp increase, with added timing °°°
°°° Do not
use for prolonged high speed runs! Speeds exceeding approx
105 MPH can result in high exhaust gas temperatures and
damage the Diesel Particulate Filter (DPF)!!!
*** All even numbered softwares (2-4-6-8) without timing
are to be used for stacking with other after market power
adding devices that also add their own timing. NO
additional timing has to be used with the odd numbered
softwares (1-3-5-7-9).
Severe engine damage will result!!!
Tested on stock trucks on our
in house Dyno Dinamics Twin Retarder Dyno.
Stock means just that. Stock! Even the air filters were
stock...
We checked the "baseline" (the
stock truck hp at the rear wheels) twice in a day in order
to be sure about our findings. The above declared hp
numbers are all rounded down to the closest number. For
example the 90 hp file actually did 96 hp. That's a 90 hp
software for me, not a 100. The 170 hp was 176.
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of
10 tenth of an inch in just a couple seconds. Of course,
Smarty needs to be VIN# locked to the truck in order to
get into the ABS adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in
plain English. That's old news by now. Smarty S-03 was the
first one to provide that utility, others found the idea
to be a good one too. (Smarty does erase ABS codes too but
does not display them)
ECM update speed
Faster than anything else on the market! Again we've done
our homework on the protocol. Less than 5 minutes. Three
times faster than a Star-Scan diagnostic tool or
competitor.
We have developed our own
bootloader in order to not have to pull fuses should an
update become interrupted for any reason. All you have to
do is to turn the key off / key on Smarty does everything
else on it's own.
Updates
The CaTCHER softwares as they are today are only a
starting point. Expect major news in future. We’re for
your feedback, opinions, likes, dislikes...
We will make Smarty do what
YOU want, TOGETHER.
|
