Fast guide to
Smarty's JR software levels
The horsepower settings have a
modified "Torque management" (TQM). The throttle response
is greatly improved but is set to a safe limit. With
"Safe" I mean safe for your tranny and rest of the
driveline.
- SW # 1 : 40 hp increase
- SW # 2 : 70 hp increase
- SW # 3 : 100 hp increase
Tested on stock trucks on our
in house Dyno Dinamics Twin Retarder Dyno.
Stock means just that. Stock! Even the air filters were
stock...
The trucks were S T O C K,
even the wastegate settings!
We checked the "baseline" (the stock truck hp at the rear
wheels) twice in a day in order to be sure about our
findings. The above declared hp numbers are all rounded
down to the closest number. For example the 90 hp file
actually did 96 hp. That's a 90 hp software for me, not a
100. The 210 hp was 215.
Power on Demand
100 power levels selectable in just one second during the
driving!
It's easy: just type the preferred power level directly on
Smarty keyboard, from 00 to 99. That's all!
For security reason, the truck waits that the throttle is
released before applying the new power level.
No trace is left in the
ECM!
I herby CLAIM that SmartyCR is the FIRST AND ONLY
downloader that does not erase any of the stored data in
the ECM. Smarty does NOT leave any electronic footprints
in the ECM or any other electronic module in the truck.
Smarty does NOT set ANY codes once the ECM is set back to
stock. Smarty does NOT need to have fuses pulled.
No matter what the competition
claims , in one way or another they're ALL detectable.
Smarty is NOT!
Yet, Smarty can not do one
thing for you. Fix what others have broken. Smarty can not
restore a key on counter that another downloader has
erased. Smarty can not fix VIN# troubles caused by other
products. If your Check engine / ABS light is on because
another product has screwed your ECM, Smarty can not fix
it, the other guy HAS to..
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of
10 tenth of an inch in just a couple seconds. Of course,
Smarty needs to be VIN# locked to the truck in order to
get into the ABS adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in
plain English. That's old news by now. Smarty S-03 was the
first one to provide that utility, others found the idea
to be a good one too. (Smarty does erase ABS codes too but
does not display them)
ECM update speed
Faster than anything else on the market! Again we've done
our homework on the protocol. Less than 5 minutes. Three
times faster than a Star-Scan diagnostic tool or
competitor.
We have developed our own
bootloader in order to not have to pull fuses should an
update become interrupted for any reason. All you have to
do is to turn the key off / key on Smarty does everything
else on it's own.
Updates
The CaTCHER softwares as they are today are only a
starting point. Expect major news in future. We’re for
your feedback, opinions, likes, dislikes...
We will make Smarty do what
YOU want, TOGETHER.
|