TomElectronics

Smarty REVOlution software

For the first time the Cummins engine performance tuning software can be customized directly by the user. With Smarty this becomes reality. The first one in the industry !!!
The Revolution starts here…
What has changed?
At first glance not too much… Smarty S04 and S06 update file now contains all truck models from 2003 to 2007 for the Dodge Cummins 5.9L Common Rail. The new software update is smaller in size than the previous ones, so it takes less time to update Smarty.
The new update is perfectly compatible with the previous firmware versions.
It is still possible to download into the truck a ready-to-use performance software, just like today. You do not need to become a rocket scientist to tune your truck, Smarty will do it for you.
Yet , over time your truck’s needs may (or better worded WILL) change and you need to adapt the tuning software to these changes.

Smarty S04 and S06

Today, this becomes reality!
When you enter the “ECM update“ menu on Smarty you will find a newly added chapter:
“Adjust Options“.
Once entered, this menu allows you to choose among several items and levels of customization.

The items are:

Speed-limiter
RPM Limiter***
Shift limiter***
Torque Management levels
Injection timing
Rail Pressure
Wastegate

The levels are:

Speed-limiter
From 25 to 250 mph in one mile increments
RPM Limiter***
# 0 - Stock
# 1 - 4200
RPM Shift Limiter***
# 0 - Stock (On)
# 1 - Off (also shift light indicator will be turned off)
Torque Management
# 0 - Default
# 1 - Stock
# 2 - Mild
# 3 - Moderate
# 4 - Wild (aftermarket clutch/AT Transmission recommended)
Injection Timing
# 0 - Default
# 1 - Stock
# 2 - for aftermarket injectors
# 3 - for fuel economy (less advanced than # 2)
# 4 - for stock injectors (less advanced than # 3)
Rail pressure
# 0 - Default
# 1 - Stock
# 2 - Mild
# 3 - Moderate
# 4 - Wild (aftermarket injectors recommended)
Wastegate (for 2004.5 and up trucks only)
# 0 - Stock (On)
# 1 - Off (for aftermarket turbo)

The above descriptions are for the REVO standard software.

*** Available, for fully prepared engines, with the TNT-Race tunes only

Smarty S03

The items are:

Speed-limiter
Torque Management levels
Injection timing
Injection duration

The levels are:

Speed-limiter
From 25 to 250 mph in one mile increments
Torque Management
# 0 - Default
# 1 - Stock
# 2 - Mild
# 3
# 4 - Moderate
# 5
#6 - Wild (aftermarket clutch/AT Transmission needed)
Injection Timing
# 0 - Default
# 1 - Stock
# 2 - for stock injectors
# 3 - for aftermarket injectors
# 4 - for fuel economy
Injection duration
# 0 - Default
# 1 - Stock
# 2 - Mild
# 3
# 4
# 5 - Long

The above descriptions are for the REVO standard software.

Smarty JR

The items are:

Torque Management levels
Injection timing

The levels are:

Torque Management
# 0 - Default
# 1 - Stock
# 2 - Mild
# 3 - Soft (less than # 2)
# 4 - Light (less than # 3)
Injection Timing
# 0 - Default
# 1 - Stock
# 2 - Wild
# 3 - Advanced (less advanced than # 2)
# 4 - Moderate (less advanced than # 3)

The above descriptions are for the REVO standard software.

How does it works?
If you prefer the Smarty standard software configuration, simply skip the “Adjust Options” menu and choose the CaTCHER level you prefer, as in previous Smarty software.
If you want to change the default setting of any (or all…) of the customizable items, you can enter the “Adjust Options” menu, navigate with the “>“ and “<“ keys to the item you want to customize and enter your choice.
Done! Smarty will do the rest.
At the end of the items list, Smarty will store your selections in its memory. In this way, your preferred selections will be applied every time you program your truck. As a simple example, if you set the Speed-limiter to “100”, Smarty will always use that value for all ECM updates. That’s, until you change the value again or return Smarty back to stock.
The REVO update is available in the download page