Category: Uncategorized

Posted on by

Software release TPMS and TCM

Smarty Touch and MM3: New firmware 2.3.2: TPMS 2007.5 – 2009 is now programmable, New maximum for Boost pressure PID, TCM 2007.5 – 2009 can now be up/downgraded with the UDC Pro-RT Pro license and in the dashboard menu point you’ll now see the last settings programmed into the truck.

Posted on by

Software release TCM and microSD size

Smarty Touch and MM3: New firmware 2.3.0: Now the TCM can be tuned for the 6.7L CR trucks MY 2007.5 – 2009 and new programmable features, fog lights with highs on + one touch lane change, for the 6.7L CR trucks MY 2013 – to present are available.

Smarty UDC Pro RT: Ver. 1.0.0.0: Now the TCM can be personalized for the 6.7L CR trucks MY 2007.5 – 2009. This is possible by creating the UDC Pro RT Document manually over menu point “Stock file manual entry…” via Get File command into File menu.

Smarty and MM3 Agent: Ver. 1.0.1.0: now microSD will be recognized up to 32GB with FAT32 format.

Posted on by

Software release New Smarty and MM3 Agents

Smarty Agent and MM3 Agent Ver. 1.0.0.0: These softwares will help you out to keep up to date Touch & MM3 firmwares and tuning data + the UDC Pro RT software on your PC. Install the one you need and check for updates. In case of a new Touch/MM3 Firmware and Tuning Data you’ll need to insert your device SD card into the computer, in order to update it.

Posted on by

Software release New ECM tuning types

Smarty Touch and MM3: New firmware 2.2.13: Now you can choose between BASIC or ADVANCED (the same as before) ECM tuning. BASIC will just tune your ECM with a base software without any request of the adjustable parameters. You can then choose, via SWITCH feature, to increase the power if needed. BASIC programming will disable all ADVANCED features like: RT programming, Data Log and High speed Data Log, PoD, etc. In order to enable them again you’ll need to tune the truck with ADVANCED ECM programming. 48RE PIDs for MY 2003-2005.5 are now enabled.